Skip to main content

Create a Windows 7 System Image for Full Backup and Restoration

Create a Windows 7 System Image for Full Backup and Restoration
Here are a few points to note when using the System Image function:
§  Try not to change the partition structure of the backed up volumes or the restore could fail. Although system imaging is supposed to be able to reformat to the previous layout, this is a common cause of a restore failing.
§  System Image will backup and restore ALL files on the system and you cannot at any point select individual files or folders. You will however, have the option to backup any files before a restore if using the Control Panel.
§  Backup to network is not available in Windows 7 Home Premium or Home Basic.
§  Only NTFS formatted partitions can be backed up. Make sure if you’re saving to USB sticks or portable hard drives they are NTFS formatted.
§  Imaging is available in Vista Business, Enterprise and Ultimate but not in Home Premium or Basic. Go to Control Panel -> Backup and Restore Center -> Back up computer. You cannot backup to network in Vista.
§  Windows 8 still has this feature in Control Panel -> Windows 7 File Recovery.
§  Don’t mix 32-bit and 64-bit discs on your operating system. For example, if you have a 32-bit Windows installed you will need a 32-bit repair disc or 32-bit Windows install DVD to perform a restore.
Creating A Windows System Image
Here we’ll show you how to create Windows 7 backup system image, the steps for Vista and Win 8 compatible versions are broadly the same. You can only do this from within Windows itself. There are a few ways of running the Windows Backup and Restore Tool which will also allow you to create a repair disc or backup files and folders, choose 1 from any of the following:
§  Click the Start orb and type backup into Search. You should see Backup and Restore appear in Programs, press Enter.
§  Click the Start orb -> All Programs -> Maintenance -> Backup and Restore.
§  Go to Control Panel and select Backup and Restore from an icon view, or System and Security -> Back up your computer in Category view.
Now in the Backup and Restore tool, click Create a system image in the left pane.

This will open up the Create a system image window. Alternatively, you can get directly to this window from the desktop by using Win Key+R and typing the following into the Run dialog box:

Now select where you’re going to backup the system image to, which can either be to hard drive, multiple DVD discs or a network location if your Windows version supports it. Removable USB devices such as flash drives will show under hard disks. If you try to select another partition on the same physical hard disk you’re backing up from, there will be a warning about it because that hard drive failing will result in both operating system and the backup being lost. If you place ANY value in your backups at all, it’s strongly recommended to use a different physical device to save them to.

The next screen will offer to backup any other volumes you might want to include in the process, the main system partition and the small 100MB boot partition if present will be automatically selected and cannot be touched.

Note: Sometimes in a multiboot system, one of your other operating system partitions will be auto selected and grayed out so you can’t turn it off. This is usually the case when you install Windows 7 after another operating system and the bootloader system files are located on that partition and not Windows 7’s. Apart from some tricky methods of manually moving all the boot files onto the windows 7 partition and making it an Active / System volume, it is recommended to either accept the included volume or use another backup software.

At the final confirmation window, the Backup and Restore tool will tell you how much space it could take to create the backup and clicking the Start backup button will start the process. Depending on the amount of data to backup and the speed of the hardware, this could obviously take from a few minutes to an hour or more. If you receive an error at this point, you might like to read our article on a possible cause for a system image backup failure.

After the backup process completes, you will be asked if you want to create a system repair disc. This is highly recommended if you don’t have a full Windows install DVD to hand and can also be created later on from the Backup and Restore tool main window. If you would like to create a repair CD on a USB stick, please follow the repair disc to USB instructions in our post detailing how to do it.

Restoring A Windows System Image

If your system has become unstable or won’t boot, it may be time to restore a previously created system image. Like the Backup process, there are a few ways to restore back your computer using the backup image that you created.

Method #1

From one of the icon views in Control Panel, select Recovery. Click Advanced Recovery methods and select the first option that says “Use a system image you created earlier to recover your computer”.

Because the system image restore will delete ALL files currently on the system, you will be given the chance to backup any files that weren’t in the original system image. If you have files to backup, then click Back up now and do so, otherwise click Skip. Click the Restart button which will reboot your computer. Then simply enter your keyboard language.

Method #2

This is the next best option if Windows cannot start up. Turn on your computer and start tapping F8 key to get to the Advanced Boot options screen, then select Repair your computer. Not all systems will have this option, so if you don’t and method 1 isn’t working you will need to go to method 3.

Wait for the recovery mode to load, then select a keyboard layout and choose a username with a user’s password if there is one. Finally, on the System Recovery Options menu, click on System Image Recovery.

Method #3

It is also possible that the hard drive’s boot sector or master boot record has become corrupted and you can’t even get to the F8 Advanced Boot Options menu. In this case you will need to start the computer with a Windows 7 system repair disc created from within Windows or a Windows install DVD which you may already have or can download and burn the ISO image. After pressing any key to boot, choose your language and keyboard layout, click Next and then click Repair your computer at the bottom.

After the Windows install is searched for and detected (it doesn’t matter if it isn’t found), click on “Restore your computer using a system image that you created earlier”, then Next.

Whichever method above was used, you will finally end up at the Select a system image backup screen. If you saved the image to another hard drive, it will be automatically selected for restore and you can simply click Next to begin. Use the Select a system image option and follow the instructions to look for a DVD backup or a network location if needed.

If you’ve changed the partition structure on the drives since the backup, you won’t be able to use methods 1 or 2 and need to use method 3. This will give the option to reformat the drives to match the layout in the backup image. Obviously an option to use with care. After a few confirmation screens the process will begin and will eventually auto reboot the computer where you should be back into a working Windows.

Tip: When saving a backup to another hard drive, the System Imaging tool will always try to overwrite any previous backup and can’t by itself perform another one leaving the previous backup in place. There is a simple trick to get around this which is to rename the folder of the current backup from WindowsImageBackup to another name such as WindowsImageBackup_2013_Jan. A renamed folder WILL have to be renamed back though for the System Image tool to recognize it for a restore.


Popular posts from this blog

IBM iAccess for windows 7.1 "a system restart is pending" error

 IBM iAccess for windows 7.1 "a system restart is pending" error HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager 1. Look for the following key:  PendingFileRenameOperations or   FileRenameOperations ** 2. Right-click ->  Rename . 3. Add a prefix ### and press Enter. 4. Close regedit and attempt the installation.  Note:  Make sure to go back and remove the ### prefix. The installation should continue.

How to change processor name permanently to fool your friends

How to change processor name permanently to fool your friends ------------------------------ ------------------------------ -------------- Would you like to show a brand new processor name which may not even published on market? Yes, definitely you will like it! With this trick, you can change the name of your processor to a personalized one like Intel i12 or something extreme like AMD Radon 30 GHz . So follow the given steps, Steps you have to perform 1. Open Notepad. Copy and paste below code into file. Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\HARDWARE\D ESCRIPTION\System\CentralProce ssor\0] "ProcessorNameString"="Intel(R ) Core(TM) i12-3470 CPU @ 32.5GHz " How to change processor name -- 2. Save the file with .reg extension, such as "anyname.reg". How to change processor name permanantly 3. Double click on file. You will get two prompt, Just allow them to install registry key. How to change processor n