Skip to main content

How To Make Bootable Pendrive?

How To Make Bootable Pendrive?
--------------------------------------
As you all know for installing an operating system we need a bootable cd which contains the specified operating system. But today I am going to tell you a trick to install operating system with the help of a pendrive by making it bootable. Just follow the below steps to make a bootable pendrive.

Step 1: Insert your pendrive in USB Port

Step 2: Navigate to Start>>Run[OR press Ctrl+R] and type cmd and press Enter to open Command Prompt.
|Windows Vista and Windows 7 users will have to navigate to Start>>All Programs>>Accessories>>Right-click on Command Prompt and select Run as Administrator|

Step 3: In Command Prompt type DISKPART

Step 4: The next step is to type LIST DISK and press Enter

Step 5: Observe carefully, you will see Disk 0 normally this is your Hard Disk
Find your USB Device number, In my case Disk 1 is my USB pen drive
Please note that Disk 1 may not pen drive in your case, so be careful with this step

Step 6: Now type SELECT Disk 1 and press Enter

Step 7: Now type CLEAN and press Enter, this will erase data from Disk 1, i.e. your Pen Drive.

Step 8: Type Create Partition Primary and press Enter

Step 9: Type Select Partition 1 and press Enter

Step 10: Type Active and press Enter

Step 11: Type Format FS:NTFS Quick and press Enter, this will format your USB Pen Drive.

Step 12: Type Assign and press Enter

Step 13: Now, finally type Exit and press Enter

Step 14:Now copy the windows files to your pendrive. That's done!!!

Now bootable pendrive with windows operating system is ready to install.

Comments

Popular posts from this blog

IBM iAccess for windows 7.1 "a system restart is pending" error

 IBM iAccess for windows 7.1 "a system restart is pending" error HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager 1. Look for the following key:  PendingFileRenameOperations or   FileRenameOperations ** 2. Right-click ->  Rename . 3. Add a prefix ### and press Enter. 4. Close regedit and attempt the installation.  Note:  Make sure to go back and remove the ### prefix. The installation should continue.

How to change processor name permanently to fool your friends

How to change processor name permanently to fool your friends ------------------------------ ------------------------------ -------------- Would you like to show a brand new processor name which may not even published on market? Yes, definitely you will like it! With this trick, you can change the name of your processor to a personalized one like Intel i12 or something extreme like AMD Radon 30 GHz . So follow the given steps, Steps you have to perform 1. Open Notepad. Copy and paste below code into file. Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\HARDWARE\D ESCRIPTION\System\CentralProce ssor\0] "ProcessorNameString"="Intel(R ) Core(TM) i12-3470 CPU @ 32.5GHz " How to change processor name -- 2. Save the file with .reg extension, such as "anyname.reg". How to change processor name permanantly 3. Double click on file. You will get two prompt, Just allow them to install registry key. How to change processor n